CPCS A58C Excavator 360° Below 10 Tonnes: Lifting Operations
Course Overview
The CPCS A58C Excavator 360° Below 10 Tonnes: Lifting Operations course provides operators with the skills and knowledge needed to safely lift, move and place suspended loads using compact tracked or wheeled excavators under 10 tonnes. Training focuses on planning lifting operations, interpreting load charts, selecting lifting accessories, configuring the excavator correctly and maintaining machine stability in a range of working conditions.
This CPCS A58C Excavator 360° Below 10 Tonnes course is suitable for both new and experienced operators who need a formal CPCS qualification for lifting operations using compact 360° excavators. It is particularly relevant to those working in utilities, groundwork, landscaping and other site environments where smaller excavators are used for lifting as well as excavation tasks.
Available Dates
Who is this course for?
This CPCS A58C Excavator 360° Below 10 Tonnes: Lifting Operations course is intended for personnel who are required to carry out lifting operations using compact 360° excavators. It is ideal for:
- Excavator operators using compact tracked or wheeled machines for lifting tasks
- Groundworkers and site operatives involved in excavation and load placement
- Utilities and civils operatives working in restricted or confined areas
- Experienced excavator operators looking to formalise lifting competence within the CPCS scheme
The course is suitable for both novice and experienced candidates, and the most appropriate CPCS route will be based on the delegate’s existing knowledge and practical experience.
What you will learn
By the end of the CPCS A58C Excavator 360° Below 10 Tonnes: Lifting Operations course, delegates will:
- Understand legal and safety requirements for planning, supervising and carrying out lifting operations, including load charts, risk assessments and method statements
- Identify and select the correct lifting accessories, ensuring they are suitable, certified and used safely
- Prepare the excavator for lifting, carrying out essential pre-use checks, configuring the boom and dipper correctly, and using stabilisers and RCIs where required
- Lift, move and place suspended loads safely, maintaining full visibility, smooth hydraulic control and correct positioning over the load’s centre of gravity
- Control load swing and movement, understanding how the environment, machine position and operator input affect stability
- Travel safely with suspended loads, applying derating, selecting safe routes and maintaining the correct boom and load height
- Maintain exclusion zones and safe communication, using recognised hand signals and radio protocols to work effectively with slingers/signallers
- Follow safe attachment and detachment procedures, including isolating controls and carrying out trial lifts
Practical exercises reflect typical site conditions where possible, giving delegates the chance to apply the theory under the guidance of an experienced instructor.
Assessment and certification
For successful completion of CPCS A58C Excavator 360° Below 10 Tonnes training, candidates must complete an end-of-course practical assessment and knowledge test with clear pass or fail criteria set out by the CPCS scheme. The assessments are designed to confirm that delegates can carry out lifting operations safely, interpret lifting information correctly and operate within the limits of the machine and the lift plan.
On successful completion of the required CPCS technical tests, delegates can apply for the appropriate CPCS A58C card in line with current CPCS scheme rules.
Entry requirements and additional information
To attend this course, candidates must be at least 18 years of age, in good physical health and able to meet the demands of practical training, including climbing on and off the plant and working outdoors in typical site conditions. An adequate level of spoken and written English is required to fully engage with the course content and assessments. There are no formal qualification requirements, although any previous exposure to plant or construction work will be beneficial.
This course can also be delivered as a COTS-accredited in-house course. In-house training can be provided either at the COTS Training centre or at customer premises, where suitable facilities and the appropriate excavator are available. In-house training is not tied to an external awarding body syllabus, which gives COTS greater flexibility to tailor the content, examples and emphasis to the customer’s site layout, machinery and lifting requirements.
Candidates will follow either the Novice or Experienced route, depending on their background:
- Novice route: For candidates who do not hold a current industry-recognised card in this category and/or have limited or no demonstrable practical experience of operating this category of plant in a construction environment. Previous site experience and a basic knowledge of construction terminology are beneficial but not essential.
- Experienced route: For candidates who hold a current industry-recognised Red Card in a relevant category or have equivalent experience. The trainer will complete an initial assessment and documented profiling to confirm suitability for the experienced route based on the candidate’s knowledge and skills.
Candidates wishing to obtain or renew a CPCS card must also meet any current CPCS scheme requirements, which may include holding a valid CITB Health, Safety and Environment test. COTS can advise on the latest requirements at the time of booking.
PPE requirements
For the practical session, delegates must wear suitable personal protective equipment. This includes:
- Safety footwear
- Suitable work clothing
- Hard hat
- High-visibility vest or jacket
- Any additional PPE required by the site risk assessment or company rules
Any extra or site-specific PPE requirements will be confirmed before the course date.
Why choose COTS Training for CPCS A58C Excavator Lifting Operations training?
Choosing COTS for CPCS A58C Excavator Lifting Operations training means delegates are taught by instructors who understand both the CPCS scheme and the realities of carrying out lifting operations with compact excavators on busy sites. Training is delivered in a clear and supportive way, with time set aside for questions, discussion and practical exercises.
By the end of the course, the aim is that every delegate is confident in preparing the machine for lifting, interpreting load information, carrying out lifting operations safely and working in line with site rules and best practice.
CPCS A58C Excavator 360° Below 10 Tonnes: Lifting Operations course FAQs
01
What is the A58C Lifting Operations variant?
The CPCS A58C category covers lifting operations carried out with a 360° excavator below 10 tonnes. It focuses on the additional skills and knowledge needed to safely lift, move and place suspended loads using a compact excavator in line with lifting plans, load charts and site procedures.
02
Do I need experience to attend the course?
The course is available through both novice and experienced routes. Previous excavator or site experience is helpful, particularly for the experienced route, but COTS will confirm the most suitable training path based on your background and documented profiling.
03
Are there any courses delegates must take before starting?
There are no formal prerequisite courses listed for attendance, but suitability will depend on your existing knowledge and practical experience. If you are unsure whether A58C is the right route for you, COTS Training can advise at the time of enquiry.
04
Can we do CPCS A58C Excavator 360° Below 10 Tonnes training at our site?
Yes. This training can be delivered at the COTS Training centre or at your own premises, provided suitable facilities, the correct excavator, and appropriate lifting arrangements are available. COTS can also offer a COTS-accredited in-house version of the course, tailored more closely to your site, machinery and lifting procedures.
05
Is the CPCS A58C Excavator 360° Below 10 Tonnes course physically demanding?
Yes, the practical elements involve climbing on and off the plant, working outdoors in typical site conditions and carrying out lifting tasks safely and accurately. Delegates should be in good physical health and able to meet the demands of practical training.
06
What are the entry requirements for the CPCS A58C Excavator 360° Below 10 Tonnes course?
Delegates must be at least 18 years of age, physically able to operate the plant safely and able to understand spoken and written English so they can follow instructions and complete the assessments. Previous plant or construction experience is helpful, but the course is available through both novice and experienced routes.
07
What certification will I receive after completing the course?
On successful completion of the required CPCS technical tests, delegates can apply for the appropriate CPCS A58C card in line with current CPCS scheme rules.
08
Do I need a CITB Health, Safety and Environment test?
Candidates looking to obtain or renew a CPCS card may need to meet current CPCS scheme requirements, which can include holding a valid CITB Health, Safety and Environment test. COTS can confirm the latest requirements when you enquire or book.

Approved Centre
Course Title
CPCS A58C Excavator 360° Below 10 Tonnes: Lifting Operations
Location
COTS Railside / Client Site
Duration
Up to 7 Days (Depending on Number of Candidates)
Max delegates
Up to 3
Length of certification
2 Years (Novice) / 5 Years (Competent Operator)

